3-in-1 Electrolysis TG13
Insulated electric needles with hot & cold hammer and anti-static wrist strap on a 15.6-inch touch display.
Overview
The TG13 is a focused needle-electrolysis system for practitioners who want precise, permanent hair removal without extra attachments. Insulated electric needles deliver current to each follicle, the hot & cold hammer keeps clients comfortable, and the touch screen puts Flash, Thermolysis and Blend modes one tap away.
Hair is treated follicle by follicle, so it works on every hair color - black, blonde, red and grey - and on small or sensitive areas where precision matters most.
What's in the 3-in-1
Insulated electric needles
A hair-thin insulated probe is guided into the follicle and delivers a precise current to the growth center. Three working modes - Flash, Thermolysis and Blend - cover fine, coarse, light and dark hair.
Hot & cold hammer
Use the cold mode before treatment to numb and calm the skin, and the hot mode afterwards to ease redness and irritation. Intensity is adjusted on the handle.
Anti-static wrist strap
Worn by the therapist during needle treatments to help relieve slight discomfort.
Foot pedal
Hands-free control of the output time, so the operator can match current duration to hair thickness and follicle depth.
How a treatment works
- 1
Screen & prepare
Check contraindications, choose the area, disinfect and test the client's tolerance on a small spot.
- 2
Insert & treat
Guide the insulated needle into the follicle along the direction of growth and apply the current with the foot pedal.
- 3
Cool & soothe
Finish with the hot & cold hammer and repair gel to calm the skin and reduce redness.
Operating guidance
The TG13 uses the same Flash / Thermolysis / Blend controls as the TG09; these are the manufacturer's typical starting ranges for the insulated-needle modes. Always adapt settings to the client, test on a small area first, and confirm with us for your unit.
- Flash mode - Pulse
- Usually 1-5 (range 1-9), higher for coarser hair
- Flash mode - Time
- 1-3 seconds per treatment, to avoid heat build-up at the needle
- Flash mode - Power
- Generally 1-5, adjusted to skin tolerance and hair type
- Thermolysis mode - Power
- Generally 4-9; gentle, suited to fine, soft or light hair and small areas such as the face and underarms
- Blend mode - Power
- Generally 4-9; suited to coarse, dark or stubborn hair (beard, chest) and areas needing lasting results
- Needle depth
- About 0.5-1 mm along the direction of hair growth, never into the dermis
- Follicle spacing
- 1-2 mm between adjacent follicles in the same area
- Session length
- No more than 20 minutes per area; work in batches on dense hair
Treatable areas
Treatment examples
Manufacturer-supplied before-and-after examples. Individual results vary with hair thickness, hormones, skin type and prior hair removal, and permanent results depend on completing the full treatment cycle.
What's included
- Main unit with 15.6-inch touch display
- Insulated electric needle pen with 10 needles
- Hot & cold hammer
- Anti-static wrist strap
- Foot pedal
- Power cord
- Aluminum carrying case
Safety & aftercare
Before treatment
- Ask about health history: heart disease, hypertension, diabetes, skin inflammation, scarring tendency, pregnancy or lactation are contraindications - do not treat if any applies.
- Avoid damaged, red, swollen or allergic skin. Remove metal jewelry from the treatment area.
- Disinfect the area 2-3 times with medical alcohol (iodophor followed by saline for sensitive skin).
- Start on a small area at a low setting to test the client's tolerance to current.
After treatment
- Rinse the area with saline and apply a soothing repair gel after treatment.
- For 24 hours: keep the area dry, no makeup and no rubbing; avoid sun, saunas and strenuous exercise.
- Slight redness, swelling or scabbing for 1-3 days is normal - do not pick; let scabs fall off naturally.
- Repeat every 4-6 weeks (following the hair growth cycle); 6-12 sessions are usually needed for permanent results.
- Needles are single-use: dispose of them as medical waste. Wipe the unit and cables with alcohol after each session.
This equipment is intended for use by trained professionals in line with local regulations. Ask us for the documentation and certifications that apply in your country.
Interested in the 3-in-1 Electrolysis TG13?
Tell us about your practice and the systems you are considering. Our team replies within 24 hours with specifications, pricing and training options.